Fly freighter missions with this powerful aircraft as close to reality as it gets. The Rotate MD-11 v1.05 is now compatible with X-Plane 12, and includes many improvements and fixes. With this version of the aircraft you can now take advantage of the latest features of X-Plane 12 regarding visuals and flight model.

With the same purchase you get a copy compatible with X-Plane 11, that includes the latest bug fixes as well. As the X-Plane 12 beta progresses, we will continue to release free updates with new features and adjustments to get the best of the latest improvements of the game engine.

Changelog:

Fixed and New in Rotate MD-11 v1.05

• Compatibility with X-Plane 12 (only the X-Plane 12 specific package).
• Tuned AFS guidance at low speeds during early climb.
• Fixed guidance error during ALIGN phase in some runways.
• Tuned GPWS TERRAIN mode to avoid false positives.
• Fixed INITIALIZE CRZ ALT alert during descent.
• Fixed false positives resulting in ALT ERROR AT XXX.
• Fixed DIR TO transition calculation.
• Fixed glitch in ATS servos when advancing for TO.
• Tuned TAS/IAS values following X-Plane calibration at low speeds.
• Fixed altitude capture overshoot at high vertical speeds.
• Fixed heading mode blinking during takeoff roll.
• Fixed AFS cancel when using native trim commands.
• Fixed unwanted navaid symbols in ND.
• Fixed bug in Vapp.
• Fixed Weather Radar not showing in the ND.
• Fixed typo in the overhead panel.
• Fixed bug in bleed air logic during engine start.
• Fixed bug in START AIR PRES LO alert.
• Fixed manipulator issues in VR for X-Plane 12.
• Included a new Clean White Livery.

Fixed and New in Rotate MD-11 v1.04

• Reformulated Flight Director.
• Fixed enforment of pilot selected Vapp during final approach.
• Fixed ILS autotuning happening too far from runway.
• Fixed enforment of some VNAV restrictions during descent.
• Fixed AFS OVRD not overriding ATS.
• Fixed problem cruise level edit interfering with step climb clearance.
• Fixed autoslats logic.
• Fixed multiple usability issues in VR.
• Added cabin sound region.
• Fixed exterior sound detection with interior camera views.
• Added option to inhibit acceleration in FGCP knobs.
• Fixed native gear toggle command.
• Fixed NEXT WPT insertion in flight plan.
• Fixed selection of waypoint in FIX page.
• Added support for reversed airways.
• Added auto detection of concatenated airways.
• Fixed CTD when reloading aircraft.
• Added compatibility with Ubuntu 22.04 and other Linux flavours.
• Fixed scrolling increment below 10000ft in ALT control in FGCP.
• Added some missing information in tutorial flight document.
• Fixed some materials in cockpit.
• Added missing graphical objects in overhead.
• Improved some cockpit manipulators.
• Fixed HDG/TRK labels.
• Fixed problem when switchin from FT to M in FGCP.
• Fixed sync of FO/CPT QNH.
• Fixed ENGINE COOL alert logic.
• Added support for 5430N10000W format in flight plan import.
• Fixed elapsed timer reset between flights.
• Fixed some hydraulic dependencies.
• Fixed manual LDG ALT
• Fixed STBY compass.
• Fixed ALTN fuel field in FUEL INIT page.
• Fixed autobrake alerts.
• Fixed ballast labels in FUEL INIT page.
• Fixed a bug in tail fuel management.
• Fixed ATS transition from TO LIM to AP/FD SEL modes.
• Fixed problem in GPWS mode 4C during takeoff.
• Fixed problem in GPWS mode 2B during landing.
• Fised a bug in FGCP SPD pull action during FMS mode.
• Fixed nose gear light during gear deployment.
• Increased logo light intensity.
• Fixed bug in Tail Fuel Management logic.
• Fixed a bug in AP DISC during auto land.
• Adjusted cabin pressure schedule at high altitudes.
• Updated some documents of the manual.
• Fixed duration of SINKRATE aural warning.

Fixed and New in Rotate MD-11 v1.03

• Fixed deceleration predictions computing VNAV profile.
• Improved T/D detection.
• Adjusted transition to descent phase.
• Fixed a bug in VNAV flight-path calculation causing too steep descent at high altitudes.
• Fixed speed restrictions and deceleration schedule below transition altitude.
• Fixed issues crossing the 180º meridian.
• Fixed 2D menus in multi-monitor setups.
• Adjustments to Flight Director bars response.
• Tuned engine thrust at high altitudes.
• Tuned cabin climb rates.
• Prevent LSAS/CWS PIDs from resetting on AFS disconnect.
• Support tiller with mouse.
• Give hardware throttle priority when ATS servos are off.
• Ignore hardware throttles when ATS servos are engaged.
• Fixed engine 3 rotation issue.
• Fixed gear lights logic.
• Fixed center gear deploying on landing when commanded up.
• Support reversers with throttle commands.
• Fixed cabin pressurization rate.
• Fixed AP DISCO transition to LSAS/CWS guidance.
• Fixed a bug in F-PLN page time fields.
• Fixed arrival airport/runway symbols in ND.
• Fixed T/C and T/D calculation in some routes.
• Tuned descent performance predictions.
• Fixed descent flight path calculation in power-on-path descent legs.
• Fixed reversers N1 limit.
• Improved thrust reversers command logic.
• Fixed ILS tuning of some navaids.
• Fixed clearing of VOR2 CRS in NAV RADIO page.
• Fixed transition to early descent using V/S.
• Fixed EICL messages colors in EAD.
• Fixed wind indication in PROGRESS page.
• Removed sign of STAB setting in TAKEOFF page.
• Tuned fueld burned/predicted data.
• Fixed AFS speed target logic during takeoff.
• Fixed CTD when entering duplicate lat/lon names F-PLN page.
• Show dialed frequecies correctly in radio heads.
• Fixed aileron indications with deflected aileron configuration.
• Tuned brakes heating/cooling rates.

Fixed and New in Rotate MD-11 v1.02

• Fixed crash during activation in OSX systems.
• Fixed ILS autotuning of downwind (LOC only) navaids and autotuning distances.
• Fixed ILS manual tuning of some navaids.
• Fixed bug in ILS course indication.
• LNAV flight path is abandoned (a different case).
• LNAV winding flight path. Adjustments to PIDs.
• Improved guidance during arc transitions.
• Fixed the trend indicator in ND.

Fixed and New in Rotate MD-11 v1.01

• Loss of speed during cruise. Power has been adjusted to tables for max weights and altitudes.
• LNAV flight path is abandoned. Fixed a problem with waypoint/segment sequencing.
• LNAV winding flight path. Roll PID has been tuned for high speeds.
• HDG guidance error when heading change crosses 360.
• Brakes and tiller not working as expected with hardware controllers.
• ILS CDI frozen in ND.
• ILS courses are shown as true instead of magnetic in NAV RAD page.